Power supply: 380V 50HZ 3Ph (As per user’s power supply)
Water content: ≤ 3 ppm
Gas content: ≤ 0.1%
Particles size: ≤ 1μ
Application: to purify transformer oil, switch oil, mutual oil, cable oil, capacitor oil etc.
ZYD-I Double Stages Vacuum Transformer Oil Purifier specifically designed for purifying electrical insulating oil (transformer oil, switch oil, mutual oil, cable oil, capacitor oil) in the oil-filled electrical equipment. ZYD-I Double stages vacuum transformer oil purifier is particularly suitable for treating high-grade transformer oil, super-voltage transformer oil and new transformer oil. It is widely used in factory workshops, power transmission, transformer stations and generation stations.
ZYD-I can remove particles, dewater, degas from the old and new insulating oil more effectively; It is especially suitable for the 110KV-750KV large-scale transformer stations, ZYD-I is an upgrade from ZYD.
Under vacuum and negative pressure state, the water can be vaporized in low temperature, the higher vacuum state; the lower of water boiling point, the water is vaporized faster. Even under same temperature, water can be moved faster under vacuum state. Oil goes into heater after purified by primary filter, Oil temperature goes up when heated. Then oil goes in to vacuum separator to become oil film by the film sprayer. In vacuum separator, water becomes vapor, and discharged by vacuum.
- Removing Moisture. The final treated oil can achieve less than 3ppm
- Degassing. The final treated oil can achieve less than 0.1%;
- Removing Particles. The final treated oil can achieve 1 micrometer.
- vacuum oil injecting
- vacuum drying equipment for transformers
- Vacuum purification online work, unattended operation.
- Double-stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value ≤ 5Pa.
- Two vacuum horizontal separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.
- Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
- Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
- Condensation before vacuum pump to prolong the vacuum pump and vacuum pump oil.
- Double-infrared level sensor to keep inlet and outlet oil balance.
- Adopt with auto- pressurization defoaming technology, to prevent oil escape from vacuum pump(Optional).
- Low oil level sensor to prevent oil pump idle working, so prolong oil pump lifetime.
- Completely Intelligent pressure protector to protect oil pump and fine filter.
- Completely Intelligent vacuum controller to protect the booster pump.
- Fully intelligent temperature controller to prevent the large surge current.
- Double vacuum separators, quickly speed in removing gas and water.
- Functions of live line work onsite, vacuum drying and vacuum oiling.
|Working pressure||MPa||≤ 0.4|
|Temperature range||℃||20 ～80|
|Dielectric strength||KV||≥ 70|
|Water content||ppm||≤ 3|
|Gas content||%||≤ 0.1|
|Particles size||μ||≤ 1|
|Power supply||380V 50HZ 3Ph (As per user’s option)|