NATIONAL SERVICE HOTLINE

0086-23-88363660

0086-13983881932

Address: N0.5, Lujiaowan Road, Jiangbei District, Chongqing, 400021, China
Email: sales@cnzanyo.com; zanyooilpurifier@outlook.com
Tech & after service:afterservice@cnzanyo.com
Tel: 0086-23-88363660
Fax: 0086-23-88363660
Mobile: 0086-13983881932
Skype: zanyo.oilpurifier
WhatsApp: 8615683638961

Centrifugal Oil Filtration

Your location:home page » PRODUCT » Centrifugal Oil Filtration

ZYCF centrifuge oil purifier
  • Name:ZYCF centrifuge oil purifier
  • Model:ZYCF
  • Catalogue :Centrifugal Oil Filtration
Inquiry

Application:

ZYCFcentrifuge oil purifier is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.It is divided into 2phase solid-liquid separator and oi-water-impurity 3phase separator.

There are different discharge types of the oils,manually,partial,fully discharged,variable discharge etc which depends on the different materials.commonly,we define the capacity as density of 0# ?diesel oil ,and we have a chart to help you find out the exact processing capacity of your needs. We are not only provide the single oil separator,but also the whole unit containing the pumps,valves,heats,pipes and so on.
Principle:
Oil Disc separator is vertical centrifuge. The drum is installed on the upper side of the vertical shaft. Driven by the motor, it will rotate at a high speed through the gearing. Inside the drum there is a group of dish parts overlaying each other disc. There is very small gap between the disc. Suspension (or emulsion) is fed into the drum through the inlet in the middle of the drum. When the suspension (or emulsion) flows through the gap between the disc, under the action of the centrifuge, the solid particles (or droplets) go down to the disc in the formation of sediment (or liquid layer). Along the disc surface, the sediment slides out of the disc and accumulates at the part with the largest diameter inside the drum. After the separation, the liquid is discharge out of the drum from the drain outlet. The role of the disc is to reduce the sediment distance of solid particles (or droplets) and enlarge the sediment area of the drum. With the disc inside the drum, the capacity of the separator is improved greatly. The solid gathering inside the drum is manually removed by taking apart the drum after power off, or discharges from the drum through the slag-off part with the separator power on.


Competitive Advantage:
1. Overload over heat protection
2. High rotating speed
3. Accurate dynamic balancing
4. Long time with low vibration
5. Safety and security
6. Continuous working

Parameters:

Index

Unit

ZYCF-1.5

ZYCF-3

ZYCF-4

ZYCF-6

Flow Rate

M3/H

1.5

3

4

6

Particles

μ

2

1

Sludge-discharge

 

Manual or Automatic

Working temperature

°C

2080

Running speed

r/min

7500-8300

Water content

%

≤1

Power Supply

 

According customers’ option

Suction Pressure

Mpa

≥0.04

Outlet Pressure

MPa

≤0.2

Separating-Factor

a/g

7231

12094

8800

9400

Motor Power

kW

4

4

8

8

Heater Power

kW

24

24

30

36

Total Power

kW

28

28

38

44

Weight

Kgs

480

500

900

950

Dimension

mm

1100*850*1200

1200*950*1300

1100*800*1200

1300*1000*1300